MIMAKI JV330 Series Care And Maintenance

4. Consumable Item Replacement
32
4
Check to confirm that the protrusion amount of the blade is 4 mm.
4mm4mm
• If not, adjustment is required.
(1) Turn the white knob screw to adjust the protrusion of the blade.
• Turn the screw clockwise to protrude the blade.
• Turn the screw counterclockwise to retract the blade.
5
Tighten the screw to clamp the X cutter.
6
Insert the X cutter groove into the L-shaped slide rail.

MIMAKI JV330 Series Specifications

General

Brand	MIMAKI
Model	JV330 Series
Category	Printer
Language	English