MIMAKI JV5 Series Maintenance Manual

© 2009 MIMAKI ENGINEERING CO.,LTD.
8.2.2 P.3
8.2.2 SETUP
1
2
3
4
5
6
7
8
[FUNCTION],
[] / []
[]/[]: Changes screens.
[ENTER]: To the next screen after registration
[FUNCTION]: To the next screen
(Only when “INDIVIDUALLY” is selected)
[FUNCTION],
[] / []
[1]PRIORITY
SETUP :INDIVIDUALLY
[1]
PRIORITY <ent>
ALL PANEL, ALL HOST
[1]PRIORITY
MEDIA COMP. :HOST
:PANEL
[1]PRIORITY
HEATER :HOST
:PANEL
[1]PRIORITY
PRINT MODE :HOST
:PANEL
[1]PRIORITY
INK LAYERS :HOST
:PANEL
[1]PRIORITY
DRYING TIME :HOST
:PANEL
[1]PRIORITY
AUTO CUT :HOST
:PANEL
[1]PRIORITY
PRE-FEED :HOST
:PANEL
[1]PRIORITY
COLOR PATTERN :HOST
:PANEL
[1]PRIORITY
FEED SPD.LEVEL :HOST
:PANEL
[1]PRIORITY
REFRESH :HOST
:PANEL
[1]PRIORITY
VACUUM :HOST
:PANEL
[1]SETUP RESET
RESET :ent
[1]
SETUP RESET <ent>
*Initial operation only for the type currently selected
[1]PRIORITY
SETUP :INDIVIDUALLY
[1]
PRIORITY <ent>
[1]PRIORITY
MEDIA COMP. :HOST
[1]PRIORITY
HEATER :HOST
[1]FINE QUALITY
PASS=
 :SCAN=HiSPEED
[FUNCTION],
[] / []
[1]PRIORITY
SETUP :INDIVIDUALLY
ALL PANEL, ALL HOST
[1]PRIORITY
MEDIA COMP. :HOST
:PANEL
[1]PRIORITY
HEATER :HOST
:PANEL
[1]PRIORITY
PRINT MODE :HOST
:PANEL
[1]PRIORITY
INK LAYERS :HOST
:PANEL
[1]PRIORITY
DRYING TIME :HOST
:PANEL
[FUNCTION],
[] / []
R.1.0
Maintenance Manual > Operation Flow > Print Mode > SETUP
Model CJV30/TPC Issued 2008.08.04 Revised 2010.11.05 F/W ver. 2.50 Remark
1.2
Rev.

MIMAKI JV5 Series Specifications

General

Brand	MIMAKI
Model	JV5 Series
Category	Printer
Language	English