User Manual minCam360compact
®
®minCam GmbH, Bundesstraße 9, 87538 Fischen, Germany info@mincam.de
Version: March 2020, according to the technical state of the art at the time of publication, subject to alterations.
For inspections of 130mm< Ø
<200mm the roller skid can be
converted to the supplied, smaller
change wheels. To do so, loosen the
Allen screws on the rollers.
The roller skids can be removed.
The smaller roller skids are screwed
on.
Do the same with all six rolls. The
roller skid can be used immediately for
130mm< Ø <200mm.
To Next Page
Loading...