minCam 360compact - Product Features

User Manual minCam360compact
®
6
®minCam GmbH, Bundesstraße 9, 87538 Fischen, Germany info@mincam.de
Version: March 2020, according to the technical state of the art at the time of publication, subject to alterations
1.1.2 Product features
The pan and tilt camera system minCam360compact
®
is an optical inspection system for
the inspection of pipes, sewers, containers and cavities. For the documentation of the
inspection videos and pictures are either stored on an SD card, or processed and saved on
a computer/notebook using an acquisition and evaluation software (e.g. minREC or
WinCan, etc.).
1.1.3 Manufacturer
minCam GmbH
Bundesstraße 9
87538 Fischen
Germany
1.1.4 Copyright protection
The user manual and all pictures, illustrations and information contained therein are
the intellectual property of minCam GmbH. Any use beyond the scope of the system
use is not permitted without written permission of minCam GmbH.
1.1.5
Warranty
The warranty provisions can be found in the General Terms and Conditions. You
can find them on www.minCam.de.
1.1.6
Limitation of liability
All information and notes in this user manual are based on currently valid
regulations and standards as well as the current state of the art. The operator is
obliged to ensure safe operation. This can be ensured by:
• Providing and following the operating instructions
•
Regular training