User Manual minCam360compact
®
®minCam GmbH, Bundesstraße 9, 87538 Fischen, Germany info@mincam.de
Version: March 2020, according to the technical state of the art at the time of publication, subject to alterations
Reassemble the connection and
tighten by hand.
For screwing together the camera
must be held at the RID, not at the
camera head.
The camera with RID is now ready for
use.
To remove the RID after use, follow
the instructions from end to start.
Clean the RID with clean water after
each use and after disassembly.
When removing the RID,
make sure that the cylindrical
pin is also removed from the
camera head. If the pin
remains in the camera head
and the camera is used this
way, it can be seriously
damaged.
To Next Page
Loading...