3 - 2
3.2 Basic Operation
3.2.1 Connecting the AC Mains
• Always use the accompanying power cord delivered with the equipment.
• Before connecting the equipment to the AC mains, check that the voltage and frequency ratings of
the power line are the same as those indicated besides the AC power input.
• Use the cable retainer to secure the power cord to prevent it from falling off.
• Use the battery if the integrity of the protective earth conductor or the protective earthing system in
the installation is in doubt.
3.2.2 Turning On the Equipment
• Do not use the equipment for any monitoring or therapy procedure on a patient if you suspect it is
not working properly, or if it is mechanically damaged. Contact your service personnel or Mindray.
• Check that visual and auditory alarm signals are presented correctly when the equipment is
powered on. Do not use the equipment for any monitoring procedure on a patient if you suspect it is
not working properly, or if it is mechanically damaged. Contact your service personnel or Mindray.
, department, height, weight, admit date or doctor information can also be changed on the CMS.
3.2.3 Turning Off the Equipment
• To completely disconnect the power supply, unplug the power cord.
To Next Page
Loading...
