20 - 1
20 Recording
20.1 Setting the Recorder
• Switching on or off gridlines is not available for 80 mm recorder paper.
20.2 Loading Paper
• Use only specified thermal paper. Otherwise, it may cause damage to the recorder’s print head, the
recorder may be unable to print, or poor print quality may result.
• Never pull the recorder paper with force when a recording is in process. Otherwise, it may cause
damage to the recorder.
• Do not leave the recorder door open unless you have to reload paper or remove troubles.
20.3 Cleaning the Recorder Print Head
• Do not use anything that may destroy the thermal element.
• Do not add unnecessary force to the thermal head.
To Next Page
Loading...
