9
Setting up the System
CAUTION
To define such parameters as sample volume, reagent volume and
wavelength, follow the instructions in this manual and the package
insert of the reagents.
Samples
CAUTION
Use samples that are completely free of insoluble substances like
fibrin, or suspended matter; otherwise the probe may be
blocked.Medicines, anticoagulants or preservative in samples may
lead to unreliable results.
Medicines, anticoagulants or preservative in the samples may lead to
unreliable results.
Hemolysis, icterus or lipemia in the samples may lead to unreliable
test results, so a sample blank is recommended.
Store the samples properly. Improper storage may change the
compositions of the samples and lead to unreliable results.
Sample volatilization may lead to unreliable results. Do not leave the
sample open for a long period.
Some samples may not be analyzed on the
BS-120/BS-130/BS-180/BS-190 based on parameters the reagents
claim capable of testing. Consult the reagent manufacturer or
distributor for details.
Certain samples need to be processed before being analyzed by the
system. Consult the reagent manufacturer or distributor for details.
The system has specific requirements on the sample volume. Refer
to this manual for details.
Load the sample to correct position on the sample disk before the
analysis begins; otherwise you will not obtain correct results.
To Next Page
Loading...
