11-12 Setup
Notes:
Probe check is provided for reference only, not for confirming a diagnosis.
Each time a transducer is connected to the main system or activated, the users are
recommended to implement probe check of transducer performance.
Before probe check, make sure the probe is clean and not being used for scan.
Probe check should be performed on B mode.
11.8.3 Other Settings
Preset Manager
Load Factory Local factory default settings.
Export Export preset data to disk.
Import Import the preset data into the system.
Other
Export the operation log.
Display the prepay installment information.
11.9 System Information
Click [About] in the Setup menu to enter the system information screen. (The information
varies depending upon the system configurations and version.)
About
Product name, manufacture and other information are displayed.
About Detail
Version information about the software, hardware and other modules are displayed.
To Next Page
Loading...
