Mindray TE7T - Page 206

12-20 Setup
2. Modify the parameters in the upper part of the screen and tap [Update] to update the setting.
12.3.2.2 eGateway Store Preset
 The preset screen is as follows:
Name
Description
Service Name
The name of the eGateway service.
IP Address
IP address of the eGateway service.
Port
Port for transmitting.
Connect
Tap to verify connection.
Clear
Clear the information that is being typed in. (service not added yet)
Add
Tap to add the Network service to the service list.
Update
To save the changed parameters.
Delete
Tap to delete the selected service from the service list.
Default
To set the server as the default one.
 Add an eGateway service
1. Set the eGateway server properties as described above.
2. Tap [Add] to add the service to the service list.