Mindray Zonare ZS3 User Manual

ZS3 Instructions for Use
98 | P a g e
Tomo Mode
In Tomo mode, 9 images are displayed (9-up) with one image as reference for slices.
Figure 9-5: Tomo Mode
Features include the following abilities:
• Change line spacing between slices in mm and position of the set of lines using the
Trackball
• Select reference image (one only) using softkey
• Toggle between One-up and 9-up
• Perform measurements on One-up image
• Toggle slice lines' orientation from vertical to horizontal via softkey

Mindray Zonare ZS3 Specifications

General

Brand	Mindray
Model	Zonare ZS3
Category	Diagnostic Equipment
Language	English