Mindray Zonare ZS3

ZS3 Service Manual
Page 85 of 295
DICOM Preset
NETWORK PRESET
Refer to "11 Network" for details.
DICOM LOCAL PRESET
1. Enter the DICOM local preset screen using the path: [Setup] [DICOM].
2. Enter AE Title, Port and PDU according to the actual situation, then click [Save] to
exit the screen. Setting items are described in the following table.
Name
Description
DICOM
Local
Modality
Select a modality from the drop down list.
Station
Name
DICOM station name, which is set to "ZS3" by default.
Log Level
Select the log level:
Off: not to export logs.
Summary: export only cached logs.
Detail: export all logs.