LDAP Privilege Management
Turn on the access control function and log in to the system as Administrator before you
edit privileges for the LDAP (Lightweight Directory Access Protocol) users.
1. Enter [Setup] [System] [Security] [LDAP Config].
2. Enter the server address in the field box after accessing the network.
3. Click [Test LDAP server] to test whether the LDAP server is accessible. If the LDAP
is accessible, the system prompts the following message "Server test succeeded."
It is automatically displayed after the
server is successfully tested.
The default domain is the DC name
in the Root DN. For example, if
DC=security1, then input "security1"
in the field box of the "Default
Domain"
To Next Page
Loading...
