Control
Description/Use
Threshold / Opacity / Brightness
Softkey Label:
Threshold / Opacity / Brightness
Selectable control with rotary action to adjust control parameters
Turn softkey to increase or decrease the value of each parameter
Press softkey to switch parameters
Default is Brightness
Can also use the B-Mode button to adjust Brightness
Additional 3D/4D optimization controls are available using the OLED controls:
Control
Description/Use
Reset Select to return volume back to original state
Mode Press arrows to select an option: Surface /
Max Int / X-Ray / Min Int Chosen option
displays on Data Display
Render Quality Changes the resolution quality of the rendered image
Press arrows to make selection: FAST / BALANCED / HIGH / MAX
Chosen option displays on Data Display
Tint Press arrows to select among 4 tints: 1 gray / 3 colorized
Render Smoothing Press arrows to select the amount of smoothing desired:
0 / 1 / 2 / 3 / 4 / 5
Default is 3
Chosen option displays on Data Display
Invert Toggles On / Off
Inverts volume image to black on white
To Next Page
Loading...
