Mindray ZS3 - Page 77

ZS3 Instructions for Use
68 | P a g e
Body Markers
Body Markers can be activated and deactivated by pressing the Body Marker key on the
keyboard or by pressing the Softkey assigned to Body Marker while Annotation or
Arrow is active.
Moving Body Markers:
• Once active, pointing to the body marker graphic and pressing Select will move the
Body Marker around the screen. Pressing the Select Key again will set the
position.
Moving transducer designator on Body Marker:
• When Body Marker is activated, the transducer is attached to the trackball, so
moving the trackball will move the location of the transducer designator within the
Body Marker.
• Rotate the transducer by:
• Turning the Probe Rotate OLED
• Scrolling the trackball to the left for counterclockwise rotation; scrolling the
trackball to the right for clockwise rotation.
Changing Body Marker Library:
• Sofkey OLEDs are used to change the Body Marker Library (Body Marker selections
will change).