Page 17 The Minelab Eureka Gold
12. The Coil and Skidplate
Over a long period of time the Coil Skidplate will wear if the ground is
scrubbed continuously while searching. Minelab agents can supply a
replaceable skidplate for the Coil. This can be fitted by removing the
existing plate and pushing on the replacement skidplate (see Figure 21).
Skidplates are inexpensive and it is recommended that you protect your
coil by regularly replacing the skidplate.
Figure 21 - Skidplate to Protect Coil
Hint: The use of non-metallic tape around the edge of the coil/skidplate will
help to prevent the ingress of dirt or moisture.
P0584-A
To Next Page
Loading...
