- 2 -
MINGDA TECHNOLOGY CO.,LTD
www.md-3d.com
ESD: Use standard electrostatic discharge (ESD) precautions when working with or near electronic
components.
2 Overview
The printing process of the MD series 3D printer is as follows: the slicing software CURA convert the .stl
document into a .gcode document, and 3D printer read the .gcode document and print the raw material into a 3D
product.
Cura is a slicing software that runs on Windows XP, Windows Vista, Windows 7, Windows 8, or Windows 10.
The product size and print size of MD series 3D printer are as follows. Each filament holder can hold 1kg of
printed filament, 1 kg filament can continue to print for about 120 hours, you can also add a second roll of filament
for continuous printing.
MD Series Industrial 3D Printers have UPS and Filament sensor, which can greatly save the client's losses.
UPS: During printing, if power off, the battery in the chassis will be activated. The machine will save the data
and reset the print head to the origin and shut down. After power-on, press the power button to continue the
unfinished print job according to the screen prompt.
Filament sensor: If the filament is not detected when printing, the machine will automatically pause printing,
install new filament, and click the Continue button on the screen to continue printing.
View of 3D Printer
To Next Page
Loading...
