44
SETTING THE FUNCTION DIAL
The memory function, metering mode, exposure mode, drive mode, white balance, and camera sen-
sitivity are controlled by the function dial. Making changes with the function dial is simple. The func-
tion dial can only be used for still photography.
Turn the function dial to the mode to be changed (1).
While pressing the button in the center of the
function dial, turn the control dial near the
shutter-release button to change the mode
(2). Release the function button to set the
mode.
• Changes are displayed on the monitors and
data panel.
ISO
WB
DRIVE
PASM
MEM
Camera sensitivity
White balance
Drive modes
Exposure modes
Metering modes
Memory To store and recall camera settings (p. 46).
Changes the metering mode (p. 47).
Changes exposure mode (p. 48).
Changes drive mode (p. 54).
Changes between automatic, preset, and custom
white balance (p. 62).
Changes camera sensitivity (p. 65).
1
2
RECORDING MODE
To Next Page
Loading...
Need help?
General
