54
RECORDING MODE
The drive modes control the rate and method images are captured. Icons indi-
cating the selected drive mode appear on the data panel and LCD monitor and
in the EVF. See setting the function dial section on page 44.
DRIVE MODES
Single-frame advance – to take a single image each time the shutter-release button is
pressed.
Continuous advance – to take multiple images when the shutter-release button is
pressed and held.
Self-timer – to delay the release of the shutter. Used for self-portraits.
Bracketing – to take a series of images with differing exposure, contrast, saturation,
and color.
Interval – to take a series of images over a period of time.
LCD monitor
Data panel
All icons have been shown
for clarity. The single-frame
advance and continuous
advance indicators occupy
the same area of the data
panel. All the drive-mode
icons appear in the lower
right corner of the monitors.
UHS continuous advance – to take multiple 1280 X 960 images at approximately 7
frames per second.
To Next Page
Loading...
