Delete this frame?
NoYe s
INSTANT PLAYBACK
After an image is captured, it can be displayed on the monitors for two or ten seconds before being
saved. When in continuous-advance or bracketing mode, an index display is used. With UHS continu-
ous advance, only the last frame of the series is displayed. Instant-playback is activated and the
length of the playback period is set in the custom 2 section of the recording-mode menu (p. 78).
If the center of the controller is pressed during the instant playback, the displayed image
(s)
will immediately be saved and the playback canceled.
To delete an image during the instant playback, press the QV/delete
button.
•A confirmation screen will appear.
Use the left/right keys of the controller to high-
light “YES.”
• “NO” will cancel the operation.
: delete : store
Press the controller to delete the
image.
• The live image will be displayed on the
monitor.
• When a continuous or bracketed series
of images is captured, the entire series
will be erased.
98
RECORDING MODE
Pressing the display-informa-
tion button switches between
displaying the image with
and without the guidance
bar.
To Next Page
Loading...
Need help?
General
