Normal
Contrast:
low
Contrast:
high
Sharpness:
hard
Sharpness:
soft
71
select
enter
Use the left/right keys of the controller (1) to select the
sharpness, contrast, or saturation level; an indicator is dis-
played and the live image shows the effect of each set-
ting. Press the central button of the controller (2) to apply
the setting.
To change sharpness, contrast, or saturation, select the appropriate setting from the Digital Effects
Control option in the custom 2 section of the multi-function recording mode menu; the setting screen
will open.
1
2
If sharpness, contrast, or saturation are set to any setting other than normal, an indicator will be dis-
played on the monitor indicating an increase (+) or decrease (–) in the quality selected.
To Next Page
Loading...
Need help?
General
