Basic Custom1 Custom2
LCDbrightness
Format
Power save
Language English
1 min.
–
–
98
S
ETUP MODE
To access the menu, simply turn the mode dial to the setup position. The left/right and up/down keys
of the controller are used to move the cursor in the menu. Pressing the central button of the controller
will enter a setting.
Once a setting has been
selected, the cursor will
return to the menu options
and the new setting will be
displayed. Setting can con-
tinue to be made.
Navigating the setup menu
Press the central button of the
controller to select the highlighted
setting.
The basic tab at the top of the menu will be highlighted. Use the left/right keys of the
controller to highlight the appropriate menu tab; the menu will change as the tabs are
highlighted.
When the desired menu section is displayed, use the up/down keys to scroll through the
menu options. Highlight the option whose setting needs to be changed.
With the menu option to be changed highlighted, press the right controller key; the settings
will be displayed with the current setting highlighted. To return to the menu options, press
the left key.
Use the up/down keys to highlight the
new setting. If “Enter” is displayed,
press the central button to continue.
To Next Page
Loading...
Need help?
General
