EasyManua.ls Logo

Minolta EP5000 - Paper Separator Fingers; Exit Unit

Minolta EP5000
392 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-92
1156SBM2304A
23-4. Paper Separator Fingers
D Each of the two Fusing Rollers is provided with Paper Separator Fingers that strip the
paper from the surface of the Rollers.
z Upper Fusing Paper Separator Fingers
D The Upper Fusing Paper Separator Fingers have been coated with teflon so that they
will not be contaminated with toner.
D The tip of each Separator Finger is at all times pressed against the surface of the Upper
Fusing Roller by a pressure spring.
1136M078AA
Upper Fusing Roller
Upper Fusing Paper
Separator Finger
Rear
Front
z Lower Fusing Paper Separator Fingers
D The Lower Fusing Paper Separator Fingers are flat springs to enhance paper separat-
ing performance and ensure that the paper would not become wedged if a misfeed oc-
curs.
Lower Fusing Paper
Separator Finger
Fusing Lower Guide/Lower Fusing
Paper Separator Fingers Assy
Exit Unit
1156M021AA

Table of Contents

Other manuals for Minolta EP5000

Related product manuals