Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-96
1156SBM2500A
DEHUMIDIFYING SWITCH25
To prevent image transfer efficiency from being reduced due to damp paper in
highly humid weather, Paper Dehumidifying Heater H3 (Optional) is installed on the
base frame of the copier under the 2nd Drawer.
Drum Dehumidifying Heater H2 (Standard) is located under the Lower
Synchronizing Roller to prevent the PC Drum from forming condensation.
Copier Base Frame
Drum Dehumidifying
Switch S3
Lower Synchronizing Roller
Paper Dehumidifying Heater H2
(Optional)
Paper Dehumidifying Switch S12
1136M004AA
1136M043AA
Drum Dehumidifying
Heater H3 (Stan-
dard)
D H2, H3 ON/OFF Conditions
Dehumidifying Switch ON
Power cord Plugged in Power Switch ON *During a copy cycle
H2 ON OFF OFF
H3 ON ON OFF
*During a copy cycle: Refers to the period of time between when the Start Key is pressed
and when Main Drive Motor M1 is deenergized.
To Next Page
Loading...
