Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-68
1156SBM1805A
18-5. Universal Tray (2nd Drawer) Paper Size Detection
D The length (feeding direction) and width (crosswise direction) of the paper are inde-
pendently detected and the copier determines the paper size by combining the two
separate detections made. The “Universal Tray 13”x or 14x” function of “Tech. Rep.
Choice” must be set for the width (CD) of FLS (13” or 14” long in the feeding direc-
tion).
D On the bottom of the tray is a lever fitted to the Trailing Edge Stop and another lever
fitted to the Edge Guide. These levers actuate (activate) and deactuate (deacti-
vate) the paper size detecting switches (and sensors) to allow the copier to deter-
mine a particular paper size.
Detection in the Feeding Direction
Paper Size Detecting
Switch Assy (FD)
S61/62 Cam
Tray Frame
S63/64 Cam
Trailing Edge Stop
1149M015AA
Detection in the Crosswise Direction
Sensor Blocking Lever
Paper Size Detecting
Sensor Assy (CD)
PC73 Lever
PC72 Lever
Lever Driving Pin
1149M016AA
Edge Guide
To Next Page
Loading...
