Minolta EP5000 - Adjustment of the Leading Edge Registration for Book Second Page

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-87
(11) Adjustment of the Leading Edge Registration for Book Second Page
z Requirement
1136D036AA
z Important
This adjustment should be made after the “adjustment of the leading edge registration”.
1136D037AA
2. On the Basic screen, touch
Origi. " Copy
; then, select
Separation
.
1156D140CA
1156D158CA
3. Select
Book "1
and make three single copies on A4 crosswise paper at full size ( 1.000)
mode. Check the third copy for the leading edge registration. (If the dimensions deviate from the speci-
fications, perform the following steps to make the adjustment.)
1156D161CA
D Dimension A on the copy of a test chart (A3 or 11” 17”) as
shown on the left should measure 20 "3.0 mm and B equals
C.
D Setting range: 45 to 55
1. Place the test chart face down on the Original Glass and
align its rear left corner with the reference marker on the
Original Width Scale. Then, lower the Original Cover.