Interleaf EP5000/EP4000 SWITCHES ON PWBs, TECH. REP. SETTINGS
97.04.01
S-42
1156SBS0603A
6-3. Factory Setting Function Tree
Factory
Setting
Adjust
Function
Marketing
Area
A0 Lens Focus
A1 Lens Full Size Position
A2 Mirror Full Size Position
A3 Feed Direction Mag. Ratio
A4 Scan Regist Full Size
A5 Scan Regist Reduction
Adjust 1/2
A6 Book B-Scan Regist
A11 Scan Regist Enlargement
A12 Leading Edge Erase Adjust
A13 Trailing Edge Erase Adjust
Adjust 1/2
* See “Tech. Rep. Mode” for functions other than
F2, F4, F6, F8, and FF.
* See “Tech. Rep. Mode.”
F1 Paper Passage
F3 Exp. Lamp
F5 Optimum & AE
F7 Orig. Sensor
Developer
Paper Path Sensors
F2 Drum/Trans
F4 HV Separator
F6 Edit Ref. Adj
F8 ATDC Adjust
FF F8+F5
1156SBS060301A
1. Function
Factory Setting " Function
Touch Panel
Display
Operation
F2 Drum/Trans Checks the PC Drum Charge Corona and Image Transfer Corona for output.
Note: For factory adjustment only.
F4 HV Separator Checks the Paper Separator Corona for output.
Note: For factory adjustment only.
F6 Edit Ref. Adj Pressing the Start key turns ON and OFF the Image Erase Lamp to make a
checkered pattern on the paper for checking the lamp for correct operation
and adjusting its position.
To Next Page
Loading...
