Minolta EP5000 - Leading Edge Registration in Enlargement Mode

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-83
(2) Leading Edge Registration in Enlargement Mode
z Important
This adjustment should be made after the “adjustment of leading edge registration in the full size
mode”.
1136D034AA
2. With the “Adjust 1/2” menu on the screen, touch
Next
to show the “Adjust 2/2” menu.
3. Touch the select key
t
or
s
to highlight “A11 Scan Regist Enlargement”.
1156D156CA
1156D166CA
1. After the leading edge registration in the full size mode has
been adjusted, make three single copies on A3 or 11”
17” paper at 2.000 and check the 3rd copy for leading
edge registration.
(If the registration is up to the specifications, go to the ad-
justment in the reduction mode. If it deviates from the spec-
ifications, perform the following steps to make the adjust-
ment of leading edge registration in the enlargement
mode.)