Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-94
1156SBM2400A
EXIT UNIT24
Drive from the Fusing Unit is transmitted via a gear train to turn the 1st/2nd Paper Exit
Rollers.
Left Door
1136M081AA
1st Paper Exit Roller
Drive Gear
Exit/Duplex Switching
Plate
Exit/Duplex
Solenoid SL5
Paper Exit
Switch S53
Main Control Board PWB-A outputs a signal to energize Exit/Duplex Switching Solenoid
SL5, which switches the position of the Exit/Duplex Switching Plate. The Unit has Paper
Exit Switch S53 built into it which detects a sheet of paper being fed out of the Unit. (For
more details of switching control, see the Service Manual for “DUPLEXING UNIT”).
1139M082AA
Exit/Duplex Switching Plate
Exit/Duplex Switching Solenoid SL5
Paper Exit Roller/Rolls
Paper Exit Switch S53
Control Signal ON OFF WIRING DIAGRAM
S53 PWB-A PJ14A-8 L H 3-D
Control Signal Energized Deenergized WIRING DIAGRAM
SL5 PWB-A PJ14A-6 L H 3-C
To Next Page
Loading...
