Minolta EP5000 - Page 129

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-10
2-3. PAPER TAKE-UP/TRANSPORT SECTIONS
(1) Removal of the Paper Take-Up Unit
<Except 120V Areas>
1. Remove the Right Door, Right Cover, and Rear Cover.
2. Remove the 1st and 2nd Drawers. (For the removal of the 1st and 2nd Drawers, see p. D-17.)
3. Remove two locking wiring saddles.
4. Unplug one connector from Power Supply Board PWB-C.
5. Disconnect the hookup connector.
1156D005AA
<120V Areas>
1. Remove the Right Door, Right Cover, and Rear Cover.
2. Remove the 1st and 2nd Drawers. (For the removal of the 1st and 2nd Drawers, see p. D-18.)
3. Remove one locking wiring saddle.
4. Disconnect the hookup connector.
1156D006CA