Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-32
(9) Winding of the Lens Drive Cable
1136D135AA
Cable Drive Gear
A
B
1136D136AA
1136D137AA
1136D138AA
1. Hold the Cable Drive Gear with the bead at the bottom.
2. Wind the longer length of the cable three and 1/2 turns
clockwise around the Cable Drive Gear, working from the
back to the front side. Then tape it.
3. Wind the shorter length of the cable three and 1/2 turns
counterclockwise around the Cable Drive Gear, working
from the front to back side. Then tape it.
To Next Page
Loading...
