Minolta EP5000 - Page 180

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-61
1156SBD0208A
2-8. EXIT UNIT
(1) Removal of the Exit/Duplex Switching Unit
1. Remove the Rear Cover.
2. Open the Left Door.
3. Remove the Upper Left Cover.
1134D144AA
1156D095AA
1156D096AA
1156D097AA
4. Remove four screws to free the Sorter Connector Assy.
5. Unplug two connectors.
6. Remove one screw and the ground wire.
7. Snap off the E-ring from the shaft onto which the Exit/Du-
plex Switching Unit is mounted.
8. Work the harness indicated by the arrow off the wiring
saddle.
9. Remove one screw that holds the belt.
10. Remove two screws and the mounting bracket.
11. Remove the Exit/Duplex Switching Unit.