Minolta EP5000 - Page 197

Interleaf EP5000/EP4000 DIS/REASSEMBLY, ADJUSTMENT
97.04.01
D-78
3. Call the “Adjust 1/2” menu to the screen.
4. Touch the select key
t
or
s
to highlight “A3 Feed Direction Mag. Ratio”.
1156D138CA
1156D151CA
5. Touch the shift key
A
or
"
to change the set value.
6. Touch
Enter
to validate the setting.
D If the scale on the copy is longer than the actual scale, decrease the setting value.
D If the scale on the copy is shorter than the actual scale, increase the setting value.
*If the measurement does not fall within the specifications through one setting, try another
setting.
Setting Instructions
Touch This Key if Measurement is Shorter.
Touch This Key if Measurement is Longer.
1156D155CA
NOTE
Be sure to touch Enter before pressing the Panel Reset Key to return the copier to the Basic screen.
If this is not done, the old setting remains valid.