Minolta EP5000 - Page 315

Interleaf EP5000/EP4000 TROUBLESHOOTING
97.04.01
T-40
uAD-9 Storage Misfeed Clearing Procedure
Symptom Step Check Item Result Action
The leading edge of
the paper is station-
1
Is the Paper Guide Mylar
dirty or deformed?
YES
Clean or change the mylar.
ary inside the Du-
plex Unit.
Does PC14 operate proper-
ly? Using the IC Port Data
Check function, make an in-
YES
Change PWB-G, PWB-A
(copier), or PWB-A
(PF-205/105).
2
put port check on PWB-A
(Dup) (IC1G) PC1.
NO
Check the PC14 actuator
for operation and, if it oper-
ates properly, change
PC14.
Does SL31 operate proper-
ly?
YES
Check the Gate Switching
Lever for operation.
3
Using the IC Port Data
Check function, set the data
of PWB-A (Dup) (IC1G)
PH1 to “0.”
NO
Change PWB-G, PWB-A
(copier), or PWB-A
(PF-205/105). Change
SL31.
Paper is stationary
at the storage sec-
tion.
Does PC15 operate proper-
ly?
Using the IC Port Data
YES
Change PWB-G, PWB-A
(copier), or PWB-A
(PF-205/105).
1
Check function, make an in-
put port check of PWB-A
(Dup) (IC1G) C2.
NO
Check the PC15 actuator
for operation and, if it oper-
ates properly, change
PC15.