Interleaf EP5000/EP4000 GENERAL, MECHANICAL/ELECTRICAL
97.04.01
M-20
The 40 LEDs are grouped as follows and turned ON and OFF according to the paper
size and zoom ratio.
* In the full size mode, ON/OFF control is provided according to the paper size.
* In any zoom ratio other than full size, the copier compares the number of LEDs that
are turned ON according to the paper size with the number that are turned ON according
to the zoom ratio and uses the one that turns ON more LEDs.
*The zoom ratio is used to provide ON/OFF control of the LEDs if paper size is not input
in manual bypass copying, since the copier is unable to detect the paper size.
LED Group No. LED No. LED Group No. LED No.
0 LED1 16 LED 17
1 LED 2 17 LED 18
2 LED 3 18 LED 19
3 LED 4 19 LED 20
4 LED 5 20 LED 21
5 LED 6 21 LED 22
6 LED 7 22 LED 23
7 LED 8 23 LED 24
8 LED 9 24 LED 25
9 LED 10 25 LED 26
10 LED 11 26 LED 27 to 35
11 LED 12 27 LED 36
12 LED 13 28 LED 37
13 LED 14 29 LED 38
14 LED 15 30 LED 39
15 LED 16 31 LED 40
*The bigger the number, the nearer the LED is to the front side of the copier.
To Next Page
Loading...
