EasyManua.ls Logo

Mio DigiWalker C310 - Connecting to AC Power and Charging the Battery

Mio DigiWalker C310
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
English
5. Fully charge the battery before using your device for the first time.
1.3 Connecting to AC Power and Charging the
Battery
When charging the battery for the very first time, you should charge it for at least 8
hours.
1. Slide and click the connector converter onto the AC adapter.
2. Connect the adapter cable to the bottom of your device.
3. Plug the AC adapter into a wall outlet.
Converter
The charge indicator glows amber when charging is in progress. Do not disconnect
your device from AC power until the battery is fully charged, when the charge
indicator turns green. This will take a couple of hours.
NOTE:
z Do not immediately turn on your device after connecting the AC adapter to charge a
power-depleted battery. If you need to turn on the device again, wait for at least one
minute.
z Depending on your region of purchase, the connector converter may not look exactly the
same as the picture shown.
z Your device can also be charged when it is connected to a desktop computer via the USB
cable.
5

Other manuals for Mio DigiWalker C310

Related product manuals