1. Content of the Package
When you purchase a MIOPS Smart+, it will be delivered with the following items.
1 x MIOPS Smart+
1 x Rechargeable Battery
1 x Flash Connection Cable (PC SYNC)
1 x USB Charge Cable
2. Charging and Operation
MIOPS Smart+ comes with a rechargeable and replaceable battery which lasts up to
4 days with a single charge. The battery will be charged when you connect MIOPS
Smart+ to a USB power source. You can use your computer USB port for this
purpose.
You can power MIOPS Smart+ directly from the USB port even if the battery is not
attached into the device.
Warning: Using MIOPS Smart+ with other type of battery and power source
may harm your device.
3. First Use
Your MIOPS Smart+ may not be delivered with the latest firmware. If a new
firmware has been released, before you have used it for the first time, you should
update the firmware first. To get detailed information about the firmware
upgrade, see the Firmware Upgrade Section.
The rechargeable battery comes partially charged. You can use it right out of the
box but you may need to charge to get it fully loaded. You can charge the battery
using any USB charger (500 mA min.) or the USB port of your computer. MIOPS
Smart will be delivered with a Mini-USB cable. You can use this cable to charge it.
The mini end of the USB cable will be plugged into the USB port. It is located on
the left side of the device under the protective cover.
Opening screen of MIOPS Smart+ will appear on the device showing the MIOPS logo
and the device firmware information at the bottom of the screen. It will switch to
main menu automatically in three seconds.
To Next Page
Loading...