4. Camera and Flash Connection
The MIOPS Smart+ uses connection cables to trigger your camera or flash unit. Your
unit will be shipped with the proper camera and flash connection cables. The
MIOPS Smart is a versatile device, which is compatible with many brand and
models. You can use the same device with many different cameras by just changing
the connection cable.
The MIOPS Smart+ has separate outputs for the camera and flash cables. Both of
the output ports are located on the left side of the device under the protective
cover.
The camera cable port is a 2.5 mm stereo female jack. The camera cables have the
male 2.5 mm stereo jack on one end. This end is plugged into the camera
connection port. The other end changes depending on the camera. This end is
plugged in the shutter release port of your camera.
The flash cable port is a 3.5 mm mono female jack. There is only one type of the
flash connection cable. It has a 3.5 mm male jack on one end. This end is plugged
To Next Page
Loading...