HDR & Motion & Laser Frame Interval: This parameter is used to determine the
interval between each frame for HDR, Motion and Laser modes.
Language: This parameter is used to change the language of the mobile
application.
Color Mode: This parameter is used to change the color of the mobile application.
It can be switched between "Day" and "Night".
Buy Now: This button is used to visit the store for purchasing the product.
Feedback: This screen is used to give feedback about the mobile application to the
developers.
PIN Code: You can assign a PIN to your device to prevent others from connecting to
your device.
IR Settings: MIOPS Smart+ has IR triggering capabilities. You can select your
camera brand between Canon, Nikon and Sony to trigger your camera if it has IR
triggering capabilities.
Smart+ Screen Saver: This parameter is used to define the timeout value to turn
the screen of Smart+ off for energy saving.
Shutter Settings: This parameter is used to set the behavior of Smart+ camera and
flash outputs. You can select between "Sync", "Bulb" and "Mirror Lockup".
Sync: Flash and camera is triggered at the same time.
Bulb: Camera is triggered to start long exposure as soon as the mode is started.
Flash is triggered once an event is detected.
Mirror Lockup: Camera is triggered once to lock up the mirror as soon as the mode
is started. Camera is triggered again once an event is detected.
To Previous Page
Loading...