MIR Spirolab Service Manual

Spirolab
Page 1 of 33
Rev.1.0
Service Guide
Service manual Rev. 1.0
Date issued 30.12.2014
Date of approval 30.12.2014

MIR Spirolab Specifications

General

Type	Spirometer
Connectivity	USB, Bluetooth
Battery	Rechargeable
Measurement Parameters	FVC, FEV1, PEF, FEF25-75%
Power Supply	Battery or USB power

Summary

1. Introduction

1.1. Introductory Remarks and Safety

General, safety, legal, and environmental considerations for the Spirolab service manual.

1.2. Data Registration and Documentation

1.3. General Spirolab Overview

1.3.1. Technical Data and Standards

Covers technical specifications of the Spirolab unit and the standards it complies with.

2. Hardware Description

2.1. Main Board Module and Battery Charging

Details the main board components, including the battery charging controller and its functions.

2.1.2. Sensors and Ports

Describes room temperature sensor, USB communication port, and oximetry port functionalities.

2.2. Display, Printer, and Turbine Flowmeter

Explains the display, printer, and turbine flowmeter modules and their operation.

3. Maintenance Procedures

3.1. General Maintenance and Test Equipment

Recommends annual checks and lists required tools and equipment for maintenance.

3.3. Maintenance Checklist and Functional Tests

Outlines inspection checklists and functional testing procedures, including self-tests.

4. Replacement Procedures

4.1. General Precautions for Replacement

General safety and handling precautions for replacing sensitive components.

4.2. Device Cover and Opening

Details the Spirolab case parts and provides step-by-step instructions for opening the device.

4.3. PCBs and Component Replacement

Details procedures for removing and replacing internal PCBs and components.

4.3.1. Display Replacement

Step-by-step guide for removing and reinstalling the display module.

4.3.2. Battery Pack Replacement

Detailed procedure for replacing the battery pack, including safety warnings.

4.3.3. Thermal Printer Replacement

Instructions for removing and replacing the thermal printer.

4.3.4. Turbine Handling and Cleaning

Information on turbine types, handling, and cleaning procedures for the reusable turbine.

4.3.5. Software and Turbine Calibration

Covers internal software upgrades and turbine calibration instructions.

4.4. Oximeter Module Replacement

Instructions for checking and replacing the oximetry module.

4.5. Testing Procedures

Covers functional tests required after repairs for both hardware and software.

4.5.1. Oximeter Device Testing

Checks to be performed on devices equipped with an oximeter.

4.5.2. Assembled Device and Post-Repair Tests

Procedures for checking the assembled device casing and performing tests after repairs.

4.5.3. Spirometry and Oximetry Tests

Details the procedures for performing spirometry and oximetry tests.

4.5.4. Testing Procedures Without Oximeter

Outlines the specific checks for devices that do not have the oximetry function.

4.5.5. PCB Tests Without Oximeter

Lists tests performed on the PCB for devices without an oximeter.

5. Spare Parts Management

5.1. Ordering, Delivery, and Returns

Covers ordering spare parts, delivery procedures, warranty claims, and return shipments.

6. Troubleshooting

6.1. Power and Display Issues

Troubleshoots issues related to device power, battery, and display not turning on.

6.3. Battery Functionality Issues

Details troubleshooting steps for incorrect battery operation.

6.4. Spirometry Measurement Problems

Addresses issues where spirometry measurements are not taken or are incorrect.

6.6. Oximetry Measurement Problems

Troubleshoots issues with oximetry measurements, including connection and function.

6.8. USB Communication Issues

Guides on troubleshooting problems with USB data communication.

6.9. Component Index Reference

Refers to Appendix C for component identification and PCB layout.

Appendix A: Spare Parts List

Appendix B: Service Information

Appendix C: Component Identification

Annex: Document Contents