Mircom FA-301-12LDR

71
Configuration with the CFG-300 LCD Service Tool
11.3.7 Command Menu/FA-300 Config-->Opt Zone Label
Command Menu/FA-300 Config/Ipt. Zone Label
1.Initiating zone label
|
|
|
12.
[Zone-1 ]->Default
[Zone-12 ]->Default
BYPASS SWITCH TRANSLATION
KEY SEQ 1 2 3 4 KEY SEQ 1 2 3 4
--------------------------------------
Zone-1
0 Q Z Zone-2 1
Zone-3 2 A B C Zone-4 3 D E F
Zone-5 4 G H I Zone-6 5 J K L
Zone-7 6 M N O Zone-8 7 P R S
Zone-9 8 T U V Zone-10 9 W X Y
Zone-11 Back Space Zone-12 Forward
Note: Refer to 11.2.1 Using the Keypad to Program the FA-300 on page 61 for detailed
instructions on making menu selections.
Zone-1 Label
Zone-1
Zone-12 Label
Zone-12
i
1 NAC-1
2 NAC-2
3 NAC-3
4 NAC-4
Indicating Zone