Transpose
1.
2.
You can change the key of the entire keyboard with
the TRANSPOSE function by adjusting the pitch in
semitone steps.
Press [TRANSPOSE +] or [TRANSPOSE -] button to
enter the Transpose setting mode.
The LCD will display the current transpose value. The
default transpose value is 00.
Use [TRANSPOSE +] / [TRANSPOSE -] to adjust the
value from -12 to +12 semitones.
Press [TRANSPOSE +] and [TRANSPOSE -]
simultaneously to set the default value: 00.
If you don't press any button for 5 seconds after
entering the Transpose setting mode, it will quit
this menu automatically.
Voices and Effects
Press [OCTAVE +] or [OCTAVE - ] button to set the
octave mode. The LCD will display the current octave
value.
Octave
1.
Use [OCTAVE +] or [OCTAVE - ] to change the octave
value. This function can change the key -1 to 1 octave
up or down.
2.
16
To Next Page
Loading...
