MISTEL MD600 - Memory; Store and Load; Memory Date

Memory
Bank
Store and Load
Mem Bank
Mem Stor
31
Memory feature can be used to preset 48 complete
control-panel setups which could be recalled
whenever needed.
There are 8 banks in total; each bank has 6 memories
(M1~M6).
Press [BANK] button, the LCD displays 00x Mem Bank
with 00x showing the Bank that has been selected.
Use [+/YES] / [-/NO] button or DIAL to select the bank.
"",
Select the desired parameter. The following data can be
stored to memory: Voice Right 1, Voice Right 2, Voice Left,
Sustain, Style, Tempo, Function parameter, Mixer parameter,
ACCOMP volume and the Octave.
Press and hold [STORE] then press M1(or M2~M6).
The data will be stored to the M1 (M2~M6). Please note
that it will clear the recorded data.
The data can be stored to the memory are as follows:
Voice Right 1, Voice Right 2, Voice Left, Sustain, Style,
Tempo, Function parameter, Mixer parameter, ACCOMP
volume and the Octave.
If current data is not the same as the current memory
data, the corresponding memory flag on LCD will be
erased.
Memory Date
ONE TOUCH SETTING
BANK O.T.S.
STORE
ONE TOUCH SETTING
BANK O.T.S.
STORE
1.
1.
2.
2.
DZB0'B0DQXDOBB*BSDUWBDZB0'B0DQXDOBB*BSDUWB 