10 Using the phone system
Final
You can pull back a call that has been answered by a twinned target phone by
pressing the corresponding Line Appearance key. See “Twinned calls on the
5320/5330/5340/5260 phone” on page 29
Using the 5320/5330/5340/5260 handset
To answer your phone using the handset, follow these steps:
1 Lift the handset.
Note: If you choose to ignore the incoming call and select a different line
appearance, the line appearance continues to flash but the phone stops
ringing.
To end the call while using the handset, choose one of the following:
• Press the END softkey.
• Replace the handset.
Using the 5320/5330/5340/5260 speakerphone
To switch from the handset to the speakerphone during a call, follow these
steps:
1 Press the key.
2 Replace the handset.
To end a call while using the speakerphone, choose one of the following:
• Press the END softkey.
• Press the key.
Switch from speakerphone to handset on the 5320/5330/
5340/5260 phone
To switch from the speakerphone to the handset during a call, pick up the
handset.
To end the call while using the handset, choose one of the following:
• Press the END softkey.
• Replace the handset.
Answering a second call on the 5320/5330/5340/5260 phone
A second incoming call causes three things to happen: (1) the phone rings
once (only if you are using the handset), (2) a line appearance flashes, and
(3) the Information Area Display shows the number and name of the caller, if
To Next Page
Loading...
