Using the phone system 61Final
• Alternatively, you may choose to use one of the following methods:
- Press the flashing Line Appearance key.
- Press the key.
You have now answered the call. The LCD displays the caller's name (if
known).
If you choose to ignore the incoming call and select a different line
appearance, the line appearance continues to flash but the phone stops
ringing.
Using the 5212/5312 speakerphone
To switch from the handset to the speakerphone during a call, follow these
steps:
1 Press the key.
2 Replace the handset.
3 To end a call while using the speakerphone, press the key.
Switch from speakerphone to handset on the 5212/5312
phone
To switch from the speakerphone to the handset during a call, pick up the
handset.
To end the call while using the handset, replace the handset.
Answering a second call on the 5212/5312 IP phone
A second incoming call causes three things to happen: (1) the phone rings
once (only if you are using the handset), (2) a line appearance flashes, and
(3) the LCD displays the number and the name of the caller, if the caller is
known.
To answer a second call, choose one of the following:
• Press the flashing Line Appearance key. This puts the active call on hold
and answers the second call.
321: Robin Jones
))321: Robin Jones
To Next Page
Loading...
