Mitel 5320e - Changing Volume Levels; Changing the Ring Tone

Mitel 5320e/5330e/5340e User Guide
14
Adjusting the Conference Unit Volume
The following instructions describe how to adjust the Conference Unit volume.
To adjust the Conference Unit volume:
• Press Volume Up or Volume Down.
Muting the Conference Unit
You can mute the Conference Unit so that conversation or noise near the Conference Unit
cannot be heard by individuals being conferenced.
To mute the Conference Unit:
• Press Mute.
Placing the Conference Unit in Presentation Mode
Presentation Mode should be used when only one individual will be speaking into the
Conference Unit. If another individual near the unit wishes to speak, you should disable
Presentation Mode. Presentation Mode minimizes extraneous noise.
To enable/disable Presentation Mode:
• Toggle Presentation Mode on or off in the Conference Controller application.