Mitel 5320e - Changing Your Station Passcode

Mitel 5320e/5330e/5340e User Guide
78
To turn off Call Forwarding using Remote Programming:
• Dial 355, and then hang up.
Changing Your Station Passcode
You can use Remote Programming to change the station (phone) passcode. See page 72 for
details on setting up a passcode for your extension.
To change your station passcode using Remote Programming:
1. Do one of the following:
• Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
• Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your passcode followed by #.
5. Dial 392.
6. Enter the new passcode followed by
#.
7. Enter the new passcode again followed by #.