Adjusting the Display Contrast and Brightness
You can adjust the display Contrast and Brightness levels. (Brightness adjustment is available
on models with backlit displays only.)
To adjust the Contrast or Brightness levels:
1. Press (Applications).
2. Press Settings, and then press Brightness and Contrast.
3. Press (Contrast or Brightness) + or – to find the level you want to use.
4. Press # or Save to save the setting, and then press Close to exit the Applications menu.
Changing the Language
You can change the language in which phone prompts and applications appear. Supported
languages are American English, British English, Canadian French, and Mexican Spanish.
The system can support up to four languages at one time. The language choices appearing on
your display are controlled by system programming.
To change the display/prompt language:
1. Press (Applications).
2. Press Settings, and then press Languages.
3. Press the language that you want to use.
4. Press Save to save the setting, and then press Close to exit the Applications menu.
Note: By default, the IP phone display dims to 20 percent of the maximum brightness
level after 5 minutes of inactivity (no button presses or audio, including background
music). If the brightness is set at the lowest level, you may not notice when the display
dims.
Note: If your system administrator changes the language after the IP phone is
already online, the new language option will not be displayed until the IP phone is
restarted.
To Next Page
Loading...
