5312/5324 IP Phones User Guide
7.
Do one of the following:
To enter a new number, dial the number (press
(HOLD) between digits to
create a one–second pause during dialing; press
(HOLD) more than once to
lengthen the pause.)
To enter a trunk flash, press
(TRANS/CONF). (See "Trunk Flash" for more
information about the use of this feature.)
8. On a 5312 IP Phone only, press the personal key again.
9. Do one of the following:
To make the number private, press * or the Priv softkey
To keep the number visible, press # or the Save softkey.
10. Press
(APPLICATIONS).
Speed Call – Personal
To dial a stored personal Speed Call number:
1. Lift the handset.
2. Dial the appropriate feature access code.
3. Enter an index number between 00 and 09.
To stor
e a personal Speed Call number:
1. Lift the handset.
2. Dial the appropriate feature access code.
3. Enter an index number between 00 and 09.
4.
Dial the number to be stored (press
(HOLD) between digits to create a one–second
pause during dialing; press
(HOLD) more than once to lengthen the pause.)
5. Hang up.
Handsfree Operation
To use Handsfree to make a call:
1. If you want to use a Non–Prime Line, press a Line Appearance key. Note: Your
administrator must program Line Appearances to your phone.
2. Dial the number.
3. Begin speaking when the called party answers. Your phone's Handsfree microphone and
Handsfree speaker transmit and receive audio.
- 14 -
To Next Page
Loading...
Need help?
General
