Mitel 5324 IP - Using Other Features; Call Management and Access Codes

5312/5324 IP Phones User Guide
To tran
sfer an active call during headset operation:
1. Press
(TRANS/CONF).
2. Dial the number of the third party.
3. To complete the Transfer, press the Release feature key.
Conference
To form a Conference when a two–party call is already in place, or to add another party
to an existing Conference:
1. Press
(TRANS/CONF).
2. Dial the number of the next party.
3. Wait for an answer.
4. Press
(TRANS/CONF).
To leave a Conference:
 Hang up or press
(CANCEL).
Conference Split
To Split a Conference and speak privately with the original party on a 5312 IP Phone
(only):
1. Press
(TRANS/CONF).
2. Dial the appropriate feature access code.
To Split a Conference and speak privately with the original party on a 5324 IP Phone
(only):
 Press the Split softkey.
Add Held (5324 IP Phone only)
To move a call on hold to another line appearance:
1. Press an available line key.
2. Press the AddHeld softkey.
3. Press the flashing line key.
- 17 -